Precision Storage Vessels Pvt Ltd



Other Products


Clean Steam Generator
  • Designed to provide clean steam for Hospitals, Pharmaceutical plants etc.
  • Fully compliant to European Directive EN285 and SME codes.
  • All welded parts are made of 316 Stainless Steel
  • Compact Modular design
  • Working pressure up to 10 bar
  • Capacity 260 kg/hr to 4000 kg/hr.


De-Aerated Feed Water Tanks : De-aerated feed tanks are used to remove oxygen from the water that is fed for the boilers. Oxygen in feed water can be removed by heating the water and by chemical treatments. If the water is heated to 85-90°C, bulk of the oxygen will be removed.

De-aerated feed tanks are classified into two types.
  • Flash condensing De-aerator tanks
  • Tray type De-aerator.


Flash Condensing De-aerator tanks :Flash Condensing De-aerators are of non pressurized type with capacities ranging from 500 litres to 20,000 litres. These tanks are made of Stainless Steel. Tank will be fitted with a flash condensing de-aerator head consists of mixing unit, immersion tank. De-aerator head will have a airvent and vaccum breaker connection also.

Tray Type De-aerator tank
  • Guaranteed oxygen removal to 0.005 cc/litre (7PPB)
  • Guaranteed to eliminate titratable free carbon dioxide to O
  • Guaranteed to heat water to the corresponding temperature of the saturated steam contained within the vessel
  • Turndown 20-1
  • Capacities from 5000 # hr to 1,000,000 # hr
  • 10 minutes of storage capacity minimum
  • #430 stainless steel Riveted Trays.
  • #304 Stainless Steel internal vent condenser (direct contact on units > 30,000 PPH)
  • #316 Stainless Steel spray valves
  • #304 Stainless Steel tray enclosure
  • Our exclusive gliding tray door system for ease of tray inspection and removal
  • All de-aerators designed for extract job conditions, no over or under sizing
  • Completely packaged and ready for installation
  • All vessels designed, built and stamped in accordance with the ASME code for 50 psig


Diesel Tank
  • Material : Carbon Steel
  • Capacities : 500 litres to 50,000 litres
  • With all standard provisions like:-
  • One manhole
  • Access ladder
  • Hand rails
  • 2 saddle of 200m height
  • ½” acrylic tube with valves for level indication.
  • Painted with one coat of primer and one coat of finish paint externally with internal wire brush cleaning


Contact Us

Precision Storage Vessels Pvt Ltd

Kalpadi P.O, Via Vellichanthai, Near Vellimalai, Kanyakumari District, Nagercoil, Tamil Nadu - 629204, India

Phone No :
+91-4651-237730

Alternate Email ID :
manuel@psvpl.com